A consistent relative humidity of 70 - 72 % and temperature of 18° - 21°C (64° - 70°F) are ideal conditions for the cigars but does your humidor have anyway of notifying you if conditions are not what they should be? qBiq can easily make any humidor a smart humidor and can help to make sure your next cigar is your best cigar.

Core Settings

---

Notifications 15 Minutes

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 21 Degrees Celsius

---

Low Limit 18 Degrees Celsius

---

Humidity Settings

---

Fahrenheit (Your Choice)

---

High Limit 68 Percent

---

Low Limit 74 Percent

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose the setting you wish to set "Temperature" "Humidity".

Core Configuration
Notifications: Every 15 minutes, so you don't get aggravated during one opening and shutting of the door.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a month or so this way.
Samples per Report: Feel free to sample the movement of the door/lid so you know if anyone is getting into your stash.

From there, choose these simple settings to monitor a door;

Movement Configuration
Blink When Moved: This is just as it says, if selected, qBiq will blink each time it's moved.
Level: .06g picks up a very slow door open, but not wind or air pressure from the door movement (depending on the door) set to your liking. 
Counter Threshold: If it moves even once, report.
Report Delay: Every time you open a door - you usually shut it again. Ergo, most movements will require at least two movements. If you believe you might take longer than ten seconds to make it through the door, give yourself some extra time!

The settings screen in the app are easy to use and understand. Configure your settings the way you wish.

 

 

 

Using the qBiq to monitoring the temperature or humidity in your green house or growing area is easy with qBiq. qBiq also make it easy to share your data and compare your plants data with other plant growers and Horticultures. Get a notification quickly and easy by configuring it for this purpose! 

qBiqs contextual chat feature is also great for when you are following or comparing other peoples plant conditions who have an interest in the same kind of plants.

Core Settings

---

Notifications 15 Minutes

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 25 Degrees Celsius

---

Low Limit 20 Degrees Celsius

---

Humidity Settings

---

High Limit 70% 

---

Low Limit  65%

---

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose "Movement".

Core Configuration
Notifications: Every 15 minutes, so you don't get aggravated during one opening and shutting of the door.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a month or so this way.
Samples per Report: Feel free to sample the temperature or brightness while you are at it.

From there, choose these simple settings to monitor a door;

Movement Configuration
Blink When Moved: It's nice to see the qBiq blink when you open the door.
Level: .06g picks up a very slow door open, but not wind or air pressure from the door movement (depending on the door). 
Counter Threshold: If it moves even once, report.
Report Delay: Every time you open a door - you usually shut it again. Ergo, most movements will require at least two movements. If you believe you might take longer than ten seconds to make it through the door, give yourself some extra time!

With these settings, you'll get a notification every time someone opens your door.

Every time you give your qBiq a shake, it will update itself. 
  

 

 

Using the qBiq to monitoring a door opening is easy and fast. It's just as easy to monitor temperature from room to room or the humidity in the basement. Get a notification quickly and easy by configuring it for the purpose that is most important to you!

Core Settings

---

Notifications 15 Minutes

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 24 Degrees Celsius

---

Low Limit 5 Degrees Celsius

---

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose "Movement".

Core Configuration
Notifications: Every 15 minutes, so you don't get aggravated during one opening and shutting of the door.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a month or so this way.
Samples per Report: Feel free to sample the temperature or brightness while you are at it.

From there, choose these simple settings to monitor a door;

Movement Configuration
Blink When Moved: It's nice to see the qBiq blink when you open the door.
Level: .06g picks up a very slow door open, but not wind or air pressure from the door movement (depending on the door). 
Counter Threshold: If it moves even once, report.
Report Delay: Every time you open a door - you usually shut it again. Ergo, most movements will require at least two movements. If you believe you might take longer than ten seconds to make it through the door, give yourself some extra time!

With these settings, you'll get a notification every time someone opens your door.

Every time you give your qBiq a shake, it will update itself.